Introducing the insulated composite, hard sided Truck Camper

Built by Ascent Conversions

These are light weight, true 4 season truck campers designed with versatility in mind. They boast a R12-R16 insulation value with zero thermal transfer. They come in multiple sizes for mid/full size trucks with slide-in and flatbed options. You can buy them as an empty shell or as a complete build out. Learn more about each option below.

Reach out to us for any questions and to reserve yours today.

Mid Size Slide In Truck Camper

This shell is designed to fit on a small truck bed

    • Primarily designed to fit Toyota Tacoma & Jeep Gladiator.

    • Check product dimensions to see if it can work on your truck. Reach out to us for assistance. We can make it work with most small trucks.

    • Extremely lightweight (empty shell with door)

      • 5’ is 540 lbs

      • 7’ is 606 lbs

    • Camper fits mid-size Wildlands door with an optional insulation kit

    • Black powered, stainless steel corner caps

    • 2”/50mm foam core panels

    • North/South Sleeping

    • 100% composite construction that will last

    • Fiberglass extrusions = zero thermal trasfer contruction, no condensation inside in cold weather

    • Designed with low overhang for maximum trail performance

    • Alcove= Width 164cm/64.5“ Depth 122cm/48” Height 78.5cm/30.9

    • Fully assembled camper shell

    • Manual Camper Jacks

    • Artic Tern Door

    • Heavy Duty tie down points, pre installed on camper

    • You can buy just the shell and DIY the build you envisioned

    • Ascent Conversions offers partial or full build outs to your specifications

    • Listed pricing shows just the shell with door

    • Reach out to us for custom pricing and information

    • Partial list of Items Ascent Conversions can add:

      • Windows

      • Cabinetry

      • Bed Platform System with mattress

      • Heater

      • Battery/Solar Systems

      • Water Systems

      • Exterior fittings

      • And much much more!

  • Lynx 5’ Slide in: $17,200

    Lynx 7’ Slide in: $17,600

Full Size Slide In Truck Camper

This shell is designed to fit on a full size truck bed, 6.5’ or 8’

    • Primarily designed to fit Ford F15 /250 and Dodge 1500/3500

    • Check product dimensions to see if it can work on your truck. Reach out to us for assistance. We can make it work with most small trucks.

    • Extremely lightweight (empty shell with door)

      • 6.5’ is 795 lbs

      • 8’ is 895 lbs

    • Camper fits Artic Tern Euro or Wildlands door, optional Insulation kit available

    • Black powered, stainless steel corner caps

    • 2”/50mm foam core panels

    • East/West Sleeping

    • 100% composite construction that will last

    • Fiberglass extrusions = zero thermal trasfer contruction, no condensation inside in cold weather

    • Designed with low overhang for maximum trail performance

    • Alcove= Width 196.5cm/77.375” Depth 122cm/48” Height 86.5cm/34”

    • Fully assembled camper shell

    • Manual Camper Jacks

    • Artic Tern Door

    • Heavy Duty tie down points, pre installed on camper

    • You can buy just the shell and DIY the build you envisioned

    • Ascent Conversions offers partial or full build outs to your specifications

    • Listed pricing shows just the shell with door

    • Reach out to us for custom pricing and information

    • Partial list of Items Ascent Conversions can add:

      • Windows

      • Cabinetry

      • Bed Platform System with mattress

      • Heater

      • Battery/Solar Systems

      • Water Systems

      • Exterior fittings

      • And much much more!

  • Wolf 6.5’ Slide in: $18,500

    Wolf 8’ Slide in: $19,500

Flat Bed Truck Camper

This shell is designed to fit on a flat bed truck bed, 6.5’ or 8’. It offers the largest space available on a truck bed

    • Can fit all models of trucks as long as the flat bed is set up to mount the camper

    • Check product dimensions to see if it can work on your truck. Reach out to us for assistance. We can make it work with most small trucks.

    • Extremely lightweight (empty shell with door)

      • 6.5’ is 904 lbs

      • 8’ is 993 lbs

    • Camper fits Artic Tern Euro or Wildlands door, optional Insulation kit available

    • Black powered, stainless steel corner caps

    • 2”/50mm foam core panels

    • East/West Sleeping

    • 100% composite construction that will last

    • Fiberglass extrusions = zero thermal trasfer contruction, no condensation inside in cold weather

    • Designed with low overhang for maximum trail performance

    • Alcove= Width 195.8cm/77” Depth 153cm/60” Height 101.5cm/40”

    • Fully assembled camper shell

    • Manual Camper Jacks

    • Artic Tern Door

    • Heavy Duty tie down points, pre installed on camper

    • You can buy just the shell and DIY the build you envisioned

    • Ascent Conversions offers partial or full build outs to your specifications

    • Listed pricing shows just the shell with door

    • Reach out to us for custom pricing and information

    • Partial list of Items Ascent Conversions can add:

      • Windows

      • Cabinetry

      • Bed Platform System with mattress

      • Heater

      • Battery/Solar Systems

      • Water Systems

      • Exterior fittings

      • And much much more!

  • Bobcat 6.5’ Slide in: $25,000

    Bobcat 8’ Slide in: $26,000

Flat Bed Truck Camper with Departure Angle

This shell is designed to fit on a flat bed truck bed, 6.5’ or 8’. It accommodates a departure angle on the end of the camper

    • Can fit all models of trucks if the flat bed is set up to mount the camper

    • Check product dimensions to see if it can work on your truck. Reach out to us for assistance. We can make it work with most small trucks.

    • Extremely lightweight (empty shell with door)

      • 6.5’ is 970 lbs

      • 8’ is 1058 lbs

    • Camper fits Artic Tern Euro or Wildlands door, optional Insulation kit available

    • Black powered, stainless steel corner caps

    • 2”/50mm foam core panels

    • East/West Sleeping

    • 100% composite construction that will last

    • Fiberglass extrusions = zero thermal transfer construction, no condensation inside in cold weather

    • Designed with low overhang for maximum trail performance

    • Alcove= Width 195.8cm/77” Depth 153cm/60” Height 101.5cm/40”

    • Fully assembled camper shell

    • Manual Camper Jacks

    • Artic Tern Door

    • Heavy Duty tie down points, pre installed on camper

    • You can buy just the shell and DIY the build you envisioned

    • Ascent Conversions offers partial or full build outs to your specifications

    • Listed pricing shows just the shell with door

    • Reach out to us for custom pricing and information

    • Partial list of Items Ascent Conversions can add:

      • Windows

      • Cabinetry

      • Bed Platform System with mattress

      • Heater

      • Battery/Solar Systems

      • Water Systems

      • Exterior fittings

      • And much much more!

  • Wolverine 6.5’ Slide in: $26,000

    Wolverine 8’ Slide in: $27,000